This 24 cm wand is crafted from precision glass rods, featuring a tapered amethyst tip that condenses and projects “zapping” energy pulses—melding fire and water frequencies into a focused beam. A woven quartz matrix of pure silica threads encases the rod, acting as a cosmic computer to configure, store, and amplify multidimensional currents. Three opalite-infused copper coils at the distal end form a toroidal vortex that confines energy and induces interdimensional flux.
Just below, a citrine gem ring serves as an energetic capacitor: when your palm and finger chakras interface with the trigger coil, intention sparks a release of golden light. Next, a handcrafted charoite (or lepidolite) activation bead grounds emotional vibrations before a brass Celtic toroid (Triquetra motif) seals the circuit in sacred geometry. A sturdy copper triangle stabilizes the lower chamber.
Parallel side circuits of labradorite and raw amethyst reinforce the main beam, projecting dual energy streams. The “female” end houses a lapis lazuli sphere cradled by a copper coil and hematite beads, continuously drawing free ambient energy into the quartz matrix. Above the glass, a hematite plus aquamarine-like sphere circuit feeds supplemental currents back into the construct. Every element interfaces with the chakras in your fingers and palm—zapping, balancing, and amplifying life force for portal activation, chakra tuning, and energetic healing.
Dimensions
- Overall Length: 24 cm (9.5 in)
- Shaft Diameter: 2 cm (0.8 in) tapering to 0.5 cm (0.2 in) at tip
- Main Coil Diameter: 1.5 cm (0.6 in)
- Approximate Weight: 150 g (5.3 oz)
Key Components & Energetic Roles
|
Component
|
Material
|
Function & Energetic Role
|
|
Tip Crystal
|
Precision-cut amethyst
|
Condenses and projects zapping energy (fire & water fusion)
|
|
Quartz Matrix
|
Silica threads
|
Cosmic computer for energy storage, amplification, and pulse shaping
|
|
Primary Coil Wrap
|
Opalite-infused copper
|
Toroidal vortex; energy confinement and interdimensional flux
|
|
Trigger Coil
|
Citrine gems around copper coil
|
Energetic capacitor; hand-chakra interface for intentional zaps
|
|
Activation Bead
|
Charoite (or Lepidolite)
|
Emotional grounding; transformational frequency
|
|
Sigil Toroid
|
Brass (Triquetra motif)
|
Protective sacred geometry circuit
|
|
Structural Triangle
|
Copper tubing
|
Geometric stabilization; focused energy flow
|
|
Side Circuits
|
Labradorite (one side), Amethyst
|
Dual-stream projection; matrix reinforcement
|
|
Female End Sphere
|
Lapis lazuli + copper coil + hematite beads
|
Ambient energy capture; continuous free-energy intake
|
|
Secondary Circuit Beads
|
Hematite + aquamarine-like sphere
|
Supplemental feed-in circuit; water element resonance
|
Usage & Care
- Grasp the wand so your palm and fingertips touch the trigger coil and adjacent circuits—this aligns the wand’s field with your hand chakras for zapping and chakra balancing.
- To zap energy: visualize your target zone, then press the tip gently against the skin or hover it an inch above; activate by engaging your palm chakras.
- For portal activation: rotate the wand clockwise while focusing on the amethyst beam.
- Clear energy by passing through sacred smoke or under cool running water (avoid heat).
- Store in a padded pouch or on a crystal grid; recharge monthly under full-moonlight or on a selenite slab.
